Showing posts with label repurposed. Show all posts
Showing posts with label repurposed. Show all posts

Monday, November 04, 2013

Emergency woodworking

Building tables from old house parts


Someday I'll remember to take better pictures. This is the first of several planned tables using reclaimed lumber from Burlington, Iowa's, Preservation Station, a non-profit run by the Heritage Trust that strips old houses of useable parts before they're torn down. They were kind enough to donate the materials to the Art Guild, where we're creating high-tops for our social events. 



Here's the plans. Quarter sawn oak from baseboards, accented with brass kickplates aged with ammonia and coarse salt.
We chose baseboard, stripped the finish off on the jointer then glued it up to form the thickness necessary.
These brass plates came from an old school, where they protected the bottom of doors. Aged them with a mixture coarse salt and ammonia, then let it sit in the sun. Finished it with a spray of clear fix. Below is the base laying on the shop floor.



So here's the thing. This old wood is VERY dry and the cracking forced us to give up on details like mortise and tenon joinery for pocket hole screws and lots of glue. And because pieces kept cracking I had to substitute wood I had in the shop, which was often pine, when I ran out of oak baseboards... did I mention the tight deadline? So instead of the tung oil finish I'd hoped to use to bring out the grain, I ended up using a a Minwax gel stain in Cherrywood..The top is pine covered in blackboard paint, which was fun for the partygoers. Since these are all donated materials we're hoping for a nice soapstone for the remaining 4. Maybe slate. Maybe chalkboard. If not, it's all good. 

Saturday, August 31, 2013

When the barn gives you a gift...

The husband's story goes something like this: It was in a barn. He thinks. Maybe a garage. He's not sure. It has a tag that says HAWKEYE, Burlington Iowa on the cabinet door
Its a sweet upper half a cabinet. And as much as I love painted furniture... and as much as I SWEAR I'll do everything I can to keep that original paint ... this time I just couldn't 
The green had crackled nicely, revealing a nice white. But that was only on one side. There was also the metallic silver used on a couple of drawers, the black sprayed on half a cabinet face, some blue that had dripped down the side and the outline of a can of red enamel that had been left sitting and puddling on top. 
 It's nearly stripped now ... I used a heat gun ... but I haven't decided what to do next. To paint or not to paint. Stain? Bleach? Paint ... definitely paint.
In the beginning

It's in the entryway now. No stain, a few coats of poly, wax, Rebuilt the drawers, added legs. Miracle... saved all the hardware. Nothing particularly creative or interesting about it beyond repair work, but sometimes a piece screams "Don't mess with me" 
















CUTE, right. I like it.